Hydraulic puller F275.P.50

TECHNICAL SPECIFICATION

Features:

  • Capstans: 2x diam. 280 mm
  • Max rope diameter: 14 mm
  • Dimensions (L x W x H): 3,10 x 1,70 x 1,75 m
  • Weight (without rope): 1 900 kg
  • Weight with rope: 2 140 – 2 280 kg (according to a diam. and length of rope)

 

  • Engine

Feeding:                                        diesel

Power:                                           35 HP/ 26 kW

Cooling:                                        water

Starting:                                        12 V

 

  • Pull performances

Max pull:                                      50 kN

Speed at max pull:                        13 m/min

Max speed                                     60 m/min

Pull at max speed                          13 kN

 

  • Reel

Type                                              extractable

Diameter                                       520 mm

Capacity of steel rope:

Ø 14 mm                                       800 m

Ø 12 mm                                       1000 m

Ø 10 mm                                       1500 m

Hydraulic puller F215.P.50 fit to pull one rope in laying underground transmission cables and optics fibre cables. One hydraulic circuit allows to continuously vary the speed in both directions by operating one control device.

 

  • One pair of multi-grooved steel capstans fit for stringing one steel rope.
  • Machine control panel equipped with built-in electronic instrument DEG 4.0 featuring a 7″ large graphic colour display and a USB port.
  • Maintenance-free load cell reading system.
  • Electronic instrument by-pass.
  • Safety negative hydraulic brake.
  • Chassis with dumped axle, tires, overrun brake, manual brake and drawbar for towing on road at max speed of 80 km/h.
  • Metallic coverage with doors.
  • Four adjustable mechanical stabilisers.
  • Attachments for anchoring and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Pulley for rope arranged for telescopic rod.
  • Built-in reel-winder with automatic rope-winder and extractable reel.

ACCESSORIES for F215.P.30 and F275.P.5

  • Printer with accessories
  • Code:  069.5
  • Device for pipe reweal
  • Device for pull force setting, which allows to maintain the pre-set even at speed ‘0’ (fit for pipe refurbishing)
  • Code: 082
  • Remote control by cable, with 10 m of cable
  • Length of the connection cable: 10 m
  • Mini joystick for controlling the rotation of the capstans
  • Speed-adjustment control
  • Emergency stop button
  • Code: 037 – REC.2
  • Telescopic rod
  • For laying underground cables
  • Mounted on pullers properly arranged, it permits to pull the wire rope inside the manholes
  • Made with galvanised/painded steel
  • Rod is easily demountable to facilitate the transport
  • Guide systém with 360° swivelling pulley
  • Code: 40