Hydraulic puller combined F275.30

TECHNICAL SPECIFICATION

Features:

  • Capstans:                         2x diam. 250 mm
  • Grooves on the capstans 7 + 7
  • Max rope diameter:             13 mm
  • Max joint diameter             40 mm
  • Dimensions (L x W x H): 2,10 x 1,60 x 1,60 m
  • Weight (without rope): 1 100 kg

 

  • Engine

Feeding:                                 diesel

Power:                                    35 HP/ 26 kW

Cooling:                                 water

Starting:                                 12 V

 

  • Pull performances

Max pull:                                30 kN

Speed at max pull:                 1,2 km/hod

Max speed:                             3,8 km/hod

Pull at max speed:                  12 kN

Hydraulic puller F275.30 for underground  cable installations and overhead  lines stringing. Puller fit to pull one rope in stringing operations of overhead transmission lines. One hydraulic circuit allows to continuously vary the speed in both directions by operating one control device.

 

  • One pair of multi-grooved steel capstans fit for stringing one steel rope.
  • Machine control panel equipped with built-in electronic instrument DEG 4.0 featuring a 7″ large graphic colour display and a USB port.
  • Electronic instrument by-pass.
  • Safety negative hydraulic brake.
  • Chassis with dumped axle, tires, overrun brake, manual brake and drawbar for towing on road at max speed of 80 km/h.
  • Mechanical front and back stabilisers
  • Attachments for anchoring and for lifting.
  • Heat exchanger to cool the oil in the hydraulic circuit.
  • Reelwinder fit for a 1400-mm-dia reel, with automatic ropewinder.