Hydraulic puller combined F230.45
![](https://forenergetics.com/wp-content/uploads/2022/08/image050.png)
TECHNICAL SPECIFICATION
Features:
- Capstans: 2x diam. 400 mm
- Grooves on the capstans 7 + 7
- Max rope diameter: 16 mm
- Max joint diameter 50 mm
- Dimensions (L x W x H): 2,85 x 1,80 x 1,85 m
- Weight (without rope): 2 100 kg
- Engine
Feeding: diesel
Power: 57 HP/ 42 kW
Cooling: water
Starting: 12 V
- Pull performances
Max pull: 45 kN
Speed at max pull: 2,2 km/hod
Max speed: 5 km/hod
Pull at max speed: 17 kN
Hydraulic puller F230.45 for underground cable installations and overhead lines stringing. Puller fit to pull one rope in stringing operations of overhead transmission lines. One hydraulic circuit allows to continuously vary the speed in both directions by operating one control device.
– One pair of multi-grooved steel capstans fit for stringing one steel rope.
– Machine control panel equipped with built-in electronic instrument DEG 4.0 featuring a 7″ large graphic colour display and a USB port.
– Maintenance-free load cell reading system.
– Electronic instrument by-pass.
– Device for pull force setting which allows to maintain the pre-set force even at speed “0”.
– Safety negative hydraulic brake.
– Chassis with dumped axle, tires, overrun brake, manual brake and drawbar for towing on road at max speed of 80 km/h.
– Hydraulic back stabilisers and manual front stabilisers.
– Attachments for anchoring and for lifting.
– Heat exchanger to cool the oil in the hydraulic circuit.
– Reelwinder fit for a 1600-mm-dia reel, with automatic ropewinder.