Winding machine series CD…/M3 or CD…/M3/BM2/

  • Type with a shaft or shaftless
  • Capacity 3 000 – 10 000 kgs, max. drum diam. 1 600 – 2 600 mm according to the type

Technical parameters (according to the type):

  • Personnel safety guards (CE standards)
  • Electro-hydraulically or by hand pump operated drum lifting
  • Mounted on steerable nylon wheels (2 fixed, 2 turnable, eventually with foot brake)
  • Electro-hydraulically or manually operated anchor jacks
  • Drum racked shaft or pintles to tighten the drum
  • Powered by variable speed motor. Electronically controlled speed variation 0-70 rpm
  • Speed 4 km/h
  • Engine 6,5 kW
  • 380V 3-phases 50 Hz supply
  • Colour red RAL 3000
  • OA/10Q60
  • Linear measuring meter
  • Accuracy +/- 1,5% on round coated cables with diameter from 5 to 60mm
  • Remark: head for measuring cables with diameter from 5 to 100mm on request

Accesories dor series CD

  • NE 218
  • Preset digital counter with 6 figures. Drive via encoder.
  • It enables the machine to slow down before stopping and not to spool over by inertia.
  • SP-08/00
  • To lay the cable neatly on th drum.
  • AUTOMATIC layering system proportional to the winding proces
  • Manual pitch setup by potentiometer with no control on perpendicularity
  • Easy and practical programming
  • Suitable for cable diameters ranging from 5 to 100 mm
  • SP-08/01
  • To lay the cable neatly on the drum at place of art. SP-08/00
  • AUTOMATIC layering system that compared to the version SP-08/00 is able to control the cable layering at best thanks to electro-mechanical sensors that correct automatically possible delays due to reversing by the end of layer or to wrong cable diameter detection or setting.  
  • Programming for cable diameters ranging from 4 to 100mm 
  • RIL-MOVE2
  • Electro-mechanical sensor to detect the machine displacement
  • It stops the machine in case of sudden movement. Very important accessory to prevent possible accidents, injuries to the operator and damages to the machine caused by mechanical entanglement of the cable at racks.
  • RG-15 or RG-22-40
  • Pair of turnable rear wheels for cross displacement  
  • This accessory shall be ordered if you have selected the item ER-CA-O-B-15 or ER-CA-22-40
  • ER-CA-O-B-15 or ER-CA–22-40
  • AC electrical motor driven manoeuvring carriage  to displace the machine without drum loaded
  • Power 0.37 kW/ 0,55 kW
  • Displacement speed 27m/min
  • Forward/ reverse gear  
  • Remark: for cross displacement  you shall order the related options
  • OE-B
  • Adjustable coiling head with removable flange for CD series
  • Cylindrical expanding inner diameter to remove the cable coil easily
  • Adjustable inner diameter from 320 to 620mm pitch 50mm
  • Overall dimensions: o/d 1000mm  w=500mm     40 kg weight
  • coil o/d  950mm,   widths 115-220mm, max. coil weight 250 kg
  • Remark: heads with other o/d and i/d are available on request  
  • TC-1-60-SE
  • Electro-hydraulically operated cutter for copper cable with diameters up to 60mm
  • For steel ropes up to 23mm
  • Remark: cutter unit up to 100mm on request
  • CHIOD50
  • Nailer powered by gas
  • Portable nailer with gas cartridge and trigger gun with rechargeable battery
  • Very powerfull
  • Fast and well balanced
  • TC-BA-30
  • Battery cutter for copper and alu cables
  • Max cable Ø 32mm
  • Cutting time 4 sec.
  • Two speeds
  • 3 kg weight
  • One 1,5Ah battery 
  • BA-CD…/24/…
  • Power supply module with battery in DC-Batteries 24V provided with power set.
  • Work autonomy: 8 hours
  • Power supply breakdown 24 V. the machine is reversible to a.c. 220V
  • Charging time: about 8 hours (night time)
  • No maintenance because of dry batteries
  • Batteries life: 6-8 years